First commit
This commit is contained in:
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file adc.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the adc.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __ADC_H__
|
||||
#define __ADC_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern ADC_HandleTypeDef hadc1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_ADC1_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ADC_H__ */
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
//#include "spi.h"
|
||||
|
||||
void initialize_ads131(SPI_HandleTypeDef *hpsi1);
|
||||
|
||||
void read_ads131(SPI_HandleTypeDef *hspi1);
|
||||
@@ -0,0 +1,46 @@
|
||||
#pragma once
|
||||
|
||||
#include "packet.hpp"
|
||||
#include "usbd_cdc_if.h"
|
||||
|
||||
extern uint8_t databank1[1024];
|
||||
extern uint8_t databank2[1024];
|
||||
extern uint16_t pos;
|
||||
|
||||
volatile extern bool usb_ready;
|
||||
|
||||
// Every time we get a reading add to the active databank if it fits,
|
||||
// if not we switch banks and write out the now unactive databank
|
||||
template<typename packet_type>
|
||||
void write(packet_type packet) {
|
||||
if (pos + sizeof(packet) + 4 < sizeof(databank1)) {
|
||||
*(uint16_t*)(&databank1[pos]) = sizeof(packet);
|
||||
*(uint16_t*)(&databank1[pos + 2]) = typecode(packet);
|
||||
memcpy(databank1 + pos + 4, &packet, sizeof(packet));
|
||||
pos += sizeof(packet) + 4;
|
||||
return;
|
||||
} else if (pos < sizeof(databank1)) {
|
||||
if (usb_ready) {
|
||||
CDC_Transmit_FS(databank1, sizeof(databank1));
|
||||
usb_ready = false;
|
||||
}
|
||||
memset(databank2, 0, sizeof(databank2));
|
||||
pos = sizeof(databank1);
|
||||
return write(packet);
|
||||
} else if (pos + sizeof(packet) + 4 <
|
||||
sizeof(databank1) + sizeof(databank2)) {
|
||||
*(uint16_t*)(&databank2[pos - sizeof(databank1)]) = sizeof(packet);
|
||||
*(uint16_t*)(&databank2[pos + 2 - sizeof(databank1)]) = typecode(packet);
|
||||
memcpy(databank2 + pos + 4 - sizeof(databank1), &packet, sizeof(packet));
|
||||
pos += sizeof(packet) + 4;
|
||||
return;
|
||||
} else {
|
||||
if (usb_ready) {
|
||||
CDC_Transmit_FS(databank2, sizeof(databank2));
|
||||
usb_ready = false;
|
||||
}
|
||||
memset(databank1, 0, sizeof(databank1));
|
||||
pos = 0;
|
||||
return write(packet);
|
||||
}
|
||||
};
|
||||
@@ -0,0 +1,49 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the gpio.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __GPIO_H__
|
||||
#define __GPIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_GPIO_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ GPIO_H__ */
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file i2c.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the i2c.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __I2C_H__
|
||||
#define __I2C_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern I2C_HandleTypeDef hi2c1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_I2C1_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __I2C_H__ */
|
||||
|
||||
@@ -0,0 +1,5 @@
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
void initialize_lsm6dsv(SPI_HandleTypeDef *hspi1);
|
||||
|
||||
void read_lsm6dsv(SPI_HandleTypeDef *hspi1);
|
||||
@@ -0,0 +1,99 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
void USB_CDC_RxHandler(uint8_t*, uint32_t);
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define IMU_DRDY_Pin GPIO_PIN_3
|
||||
#define IMU_DRDY_GPIO_Port GPIOC
|
||||
#define IMU_DRDY_EXTI_IRQn EXTI3_IRQn
|
||||
#define CLKIN_ADC_Pin GPIO_PIN_0
|
||||
#define CLKIN_ADC_GPIO_Port GPIOA
|
||||
#define ADC_CS_Pin GPIO_PIN_3
|
||||
#define ADC_CS_GPIO_Port GPIOA
|
||||
#define ADC_DRDY_Pin GPIO_PIN_5
|
||||
#define ADC_DRDY_GPIO_Port GPIOA
|
||||
#define ADC_DRDY_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define IMU_CS_Pin GPIO_PIN_4
|
||||
#define IMU_CS_GPIO_Port GPIOC
|
||||
#define BUTTON2_Pin GPIO_PIN_5
|
||||
#define BUTTON2_GPIO_Port GPIOC
|
||||
#define BUTTON1_Pin GPIO_PIN_0
|
||||
#define BUTTON1_GPIO_Port GPIOB
|
||||
#define BUTTON1_EXTI_IRQn EXTI0_IRQn
|
||||
#define VBATT_FOR_UC_Pin GPIO_PIN_1
|
||||
#define VBATT_FOR_UC_GPIO_Port GPIOB
|
||||
#define LED1_Pin GPIO_PIN_2
|
||||
#define LED1_GPIO_Port GPIOB
|
||||
#define LED2_Pin GPIO_PIN_10
|
||||
#define LED2_GPIO_Port GPIOB
|
||||
#define LED3_Pin GPIO_PIN_11
|
||||
#define LED3_GPIO_Port GPIOB
|
||||
#define PPG_DRDY_Pin GPIO_PIN_7
|
||||
#define PPG_DRDY_GPIO_Port GPIOC
|
||||
#define PPG_DRDY_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define SD_DETECT_Pin GPIO_PIN_15
|
||||
#define SD_DETECT_GPIO_Port GPIOA
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
@@ -0,0 +1,102 @@
|
||||
//#pragma once
|
||||
|
||||
//#include "rtc.h"
|
||||
|
||||
//#include <refl.hpp>
|
||||
//#include <type_traits>
|
||||
//#include <cstdio>
|
||||
//#include <cstddef>
|
||||
#include <cstdint>
|
||||
|
||||
struct timer_time {
|
||||
uint16_t tim6_value;
|
||||
uint16_t tim6_reloads;
|
||||
};
|
||||
|
||||
struct packet_rtc {
|
||||
struct timer_time t;
|
||||
RTC_TimeTypeDef sTime;
|
||||
RTC_DateTypeDef sDate;
|
||||
};
|
||||
|
||||
struct packet_vbatt {
|
||||
struct timer_time t;
|
||||
uint16_t vbatt_cnts;
|
||||
};
|
||||
|
||||
struct packet_imu {
|
||||
struct timer_time t;
|
||||
uint16_t readings_cnts[4];
|
||||
};
|
||||
|
||||
struct packet_ekg {
|
||||
struct timer_time t;
|
||||
uint8_t index;
|
||||
uint32_t readings_cnts[50];
|
||||
};
|
||||
|
||||
struct packet_strain {
|
||||
struct timer_time t;
|
||||
uint8_t index;
|
||||
uint32_t readings_cnts[5];
|
||||
};
|
||||
|
||||
struct packet_outsideT {
|
||||
struct timer_time t;
|
||||
uint8_t index;
|
||||
uint32_t readings_cnts[5];
|
||||
};
|
||||
|
||||
struct packet_insideT {
|
||||
struct timer_time t;
|
||||
uint8_t index;
|
||||
uint32_t readings_cnts[5];
|
||||
};
|
||||
|
||||
struct packet_button {
|
||||
struct timer_time t;
|
||||
uint8_t button_vec;
|
||||
};
|
||||
|
||||
struct packet_spo2 {
|
||||
struct timer_time t;
|
||||
uint32_t green_cnts[25];
|
||||
uint32_t red_cnts[25];
|
||||
uint32_t ir_cnts[25];
|
||||
};
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_rtc) {
|
||||
// return 1;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_vbatt) {
|
||||
// return 2;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_ekg) {
|
||||
// return 3;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_strain) {
|
||||
// return 4;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_outsideT) {
|
||||
// return 5;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_insideT) {
|
||||
// return 6;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_button) {
|
||||
// return 7;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_spo2) {
|
||||
// return 8;
|
||||
// }
|
||||
|
||||
// __inline__ uint8_t typecode(struct packet_imu) {
|
||||
// return 9;
|
||||
// }
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file rtc.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the rtc.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __RTC_H__
|
||||
#define __RTC_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern RTC_HandleTypeDef hrtc;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_RTC_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __RTC_H__ */
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sdmmc.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the sdmmc.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __SDMMC_H__
|
||||
#define __SDMMC_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern SD_HandleTypeDef hsd1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_SDMMC1_SD_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __SDMMC_H__ */
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file spi.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the spi.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __SPI_H__
|
||||
#define __SPI_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern SPI_HandleTypeDef hspi1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_SPI1_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __SPI_H__ */
|
||||
|
||||
@@ -0,0 +1,482 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32l4xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32L4xx_HAL_CONF_H
|
||||
#define STM32L4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_COMP_MODULE_ENABLED */
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
/*#define HAL_DCMI_MODULE_ENABLED */
|
||||
/*#define HAL_DMA2D_MODULE_ENABLED */
|
||||
/*#define HAL_DFSDM_MODULE_ENABLED */
|
||||
/*#define HAL_DSI_MODULE_ENABLED */
|
||||
/*#define HAL_FIREWALL_MODULE_ENABLED */
|
||||
/*#define HAL_GFXMMU_MODULE_ENABLED */
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_HASH_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_LTDC_MODULE_ENABLED */
|
||||
/*#define HAL_LCD_MODULE_ENABLED */
|
||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_OPAMP_MODULE_ENABLED */
|
||||
/*#define HAL_OSPI_MODULE_ENABLED */
|
||||
/*#define HAL_OSPI_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
/*#define HAL_PKA_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
/*#define HAL_RNG_MODULE_ENABLED */
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/*#define HAL_SAI_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SWPMI_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
/*#define HAL_TSC_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
/*#define HAL_EXTI_MODULE_ENABLED */
|
||||
/*#define HAL_PSSI_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
|
||||
* This internal oscillator is mainly dedicated to provide a high precision clock to
|
||||
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
|
||||
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
|
||||
* which is subject to manufacturing process variations.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
The real value my vary depending on manufacturing process variations.*/
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI1 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE 2097000U /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI2 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 0U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Register callback feature configuration ############### */
|
||||
/**
|
||||
* @brief Set below the peripheral configuration to "1U" to add the support
|
||||
* of HAL callback registration/deregistration feature for the HAL
|
||||
* driver(s). This allows user application to provide specific callback
|
||||
* functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
|
||||
* the default weak callback functions (see each stm32l4xx_hal_ppp.h file
|
||||
* for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
|
||||
* for each PPP peripheral).
|
||||
*/
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_TSC_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32l4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GFXMMU_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gfxmmu.h"
|
||||
#endif /* HAL_GFXMMU_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_firewall.h"
|
||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ospi.h"
|
||||
#endif /* HAL_OSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PKA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pka.h"
|
||||
#endif /* HAL_PKA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PSSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pssi.h"
|
||||
#endif /* HAL_PSSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32L4xx_HAL_CONF_H */
|
||||
@@ -0,0 +1,75 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32L4xx_IT_H
|
||||
#define __STM32L4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void EXTI0_IRQHandler(void);
|
||||
void EXTI3_IRQHandler(void);
|
||||
void ADC1_IRQHandler(void);
|
||||
void EXTI9_5_IRQHandler(void);
|
||||
void I2C1_EV_IRQHandler(void);
|
||||
void SPI1_IRQHandler(void);
|
||||
void SDMMC1_IRQHandler(void);
|
||||
void TIM6_DAC_IRQHandler(void);
|
||||
void USB_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32L4xx_IT_H */
|
||||
@@ -0,0 +1,55 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file tim.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the tim.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __TIM_H__
|
||||
#define __TIM_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern TIM_HandleTypeDef htim2;
|
||||
|
||||
extern TIM_HandleTypeDef htim6;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_TIM2_Init(void);
|
||||
void MX_TIM6_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __TIM_H__ */
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usart.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the usart.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USART_H__
|
||||
#define __USART_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_USART1_UART_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USART_H__ */
|
||||
|
||||
Reference in New Issue
Block a user